EN CN
Home / Services / Pump Encyclopedia / Pump Knowledge / Why use a variable frequency governor when using a mining multistage centrifugal pump?

Why use a variable frequency governor when using a mining multistage centrifugal pump?

09 Jun 2019Email

The multi-stage centrifugal pump for mine installation of the frequency converter can make the constant speed submersible pump a variable speed and high speed water pump, which makes the pump suitable for normal operation in different situations.

Advantages of variable frequency water pump:

1. The deep well situation is complex and variable. The frequency conversion speed regulation improves the flexibility of the water pump. Adjusting the frequency of the frequency conversion device can increase the viscosity of the well fluid and reduce the frequency, so that the production of the submersible pump is always in an optimal state to ensure that the motor is not overloaded.

2. Reduce the number of repairs and save the cost of downholes and wells.

3. The three-phase submersible motor is fully pressurized, the starting current is about 4-6 times the rated current, and the current is too large, so that the generator will burn out. However, the frequency conversion device can be started at low frequency and low voltage, and the starting current is about 1.5 times the rated current, which can reduce the damage to the motor. In addition, when short-term overload, the frequency conversion device automatically reduces the frequency, reduces the number of starts of the shutdown, and can extend the life of the pump.

4. The frequency conversion speed regulation can make the water pump in the best state, and solve the problem that the power consumption is the same when the water pump flow rate is low, so that the energy saving purpose can be achieved.

5. The water pump is in unclear geological conditions, and the well conditions change greatly during operation. At this time, frequency conversion speed regulation is required to make the water pump in an optimal state and flexible work.

Related Pump Knowledge
More Pump Knowledge
27 Apr 2024
            When the O-ring of the multistage pump is damaged or aged, it needs to be replaced in time to ensure the nor...
Read more
20 Apr 2024
           Multistage centrifugal pump vs single-stage centrifugal pump: Which is more efficient? For this problem, the centrifugal pump professional ...
Read more
13 Apr 2024
            Centrifugal pump and axial flow pump are two commonly used pump classes, they have a wide range of applications in industry. Although they...
Read more
07 Apr 2024
         The main function of the feed pump is to lift the deoxygenated water from the water tank or other water storage equipment and transport it in...
Read more
Related Products
More
Split Case Pump
Split Case Pump
  • Capacity:60-33005m³/h
  • Head:0.95-30.2bar
  • Price:$2200-215000
Double Suction Pump
Double Suction Pump
  • Capacity:60-33005m³/h
  • Head:0.95-30.2bar
  • Price:$2200-215000
Single Stage Chemical Pump
Single Stage Chemical Pump
  • Capacity:5.5-2600m³/h
  • Head:1.6-25bar
  • Price:$4300-37000
End Suction Chemical Pump
End Suction Chemical Pump
  • Capacity:5.5~400m³/h
  • Head:0.42-12.5bar
  • Price:$560-9800
Need More Information?
Contact us for more details about our pump, solutions and services.
Contact ZB
Tel
0086 731 88192011
Leave a message
Name*
Tel
Email*
Area
Products
Split Case Pump
Metallurgy
Mining Industry
Urban Water Supply
Petrochemical
Light Industry
Electricity
Chemical Industry
Farmland Irrigation
Other
Provide your comments and questions.