A complete high temperature anti-corrosion pump consists of a motor, a reducer, a coupling and a pump head. The pump head consists of a pump casing, front and rear side covers, gear shafts, plain bearings and shaft seals. The high-temperature anti-corrosion pump belongs to the positive displacement pump, and the melt is transported by the working volume change caused by the mutual meshing of the main and driven gears during operation.
High-temperature anti-corrosion pumps are widely used in building water supply and drainage, petrochemical power, paint plating, medical food, metallurgical industry, textile printing and dyeing, municipal environmental protection, farmland water conservancy, ceramic paper, shipbuilding aerospace, nuclear industry energy and other national defense and nationals. Various areas of the economy. The high-temperature anti-corrosion pump has high temperature resistance and super anti-corrosion performance. It is made of stainless steel and is most commonly used in the form of gear pumps. The PTFE-lined centrifugal pump has excellent anti-corrosion performance and is the best pump for conveying corrosive chemical media. However, due to the high temperature resistance of PTFE, it is not suitable for conveying high temperature and corrosive media. The following is a detailed description of several commonly used high temperature anti-corrosion pumps.
1. YCB stainless steel arc gear pump, stainless steel gear pump is mainly suitable for conveying various liquids with viscosity 5-1500cst, temperature not exceeding 80 °C, no solid particles and no corrosive. Such as gasoline, kerosene, diesel mechanical lubricating oil, liquefied petroleum gas, diamine acetate, triamine acetate and hexamine acetate. YHCB series arc gear pump, stainless steel gear pump is a kind of energy efficient special gear pump, stainless steel gear pump,
2. CB stainless steel gear pump, stainless steel gear pump is suitable for conveying oil without solid particles and fibers, non-corrosive, temperature not higher than 180 degrees, viscosity not higher than 2000 CST or liquid similar to lubricating oil.
3. KCB series stainless steel gear pump, in addition to the ordinary motor, this series of stainless steel pump can also be equipped with explosion-proof motor of the same specification according to user needs. Material: 304.316.316L stainless steel. It is mainly used for lubricating oil in lubrication systems in various mechanical equipment. It is suitable for conveying lubricity with a viscosity of 5×10-6～1.5×10-3m2/s (5-1500cSt) and temperature below 300°C. Oil.
4. 2cy stainless steel gear pump is similar to kcb stainless steel gear pump, with higher output pressure and wider application range.
5. NCB series stainless steel high viscosity rotor pump adopts the principle of internal meshing, suitable for conveying all kinds of light and volatile liquids, up to heavy, viscous liquids and even semi-solid liquids.
6. Stainless steel Roots pump sub-belt drive and gear reducer drive two forms. This pump has: low rotation number, high efficiency, small volume, large flow, low power consumption, strong self-priming ability, no oil, easy to use Features.
