EN CN
Home / Services / Pump Encyclopedia / Pump Knowledge / Single stage centrifugal pump with diesel engine power selection

Single stage centrifugal pump with diesel engine power selection

25 Jun 2019Email

The diesel engine water pump unit is driven by a diesel engine. The pump unit is driven by a diesel engine through a flexible coupling. It is used by our company to meet the needs of domestic and foreign customers for industrial emergency such as boiler feed water, high temperature circulating water and other diesel engine emergency pump systems. Integrated and highly integrated equipment specially developed for special requirements. The diesel engine unit has the following features:

        1. Automatic start: After receiving the fire alarm/pipe network pressure/blackout/other start signal, the diesel water pump unit can automatically start and put into full load operation within 15 seconds;

        2. Automatic charging: The battery can be automatically charged by the utility electric or diesel charging motor to ensure the smooth start of the unit;

        3. Automatic alarm: Automatic alarm protection for diesel engine low oil pressure, high water temperature and other faults, alarm and stop when overspeed;

        4. Automatic preheating: the diesel engine is in the standby state of the heat engine to ensure emergency work;

        5. Direct connection type: The diesel water pump unit below 360kw adopts the first direct connection technology between the diesel engine and the water pump through the flexible coupling, which reduces the failure point and shortens the starting time of the unit, which increases the reliability and emergency performance of the unit. ;

        6. The user can also request to set up other alarm outputs: the diesel-powered drive pump (or fire pump set) is safely and tightly mounted on a common chassis by horizontal centrifugal pumps and diesel electrical instruments. Through control lines and electronic control The boxes are connected.

        The complete set of water supply equipment for diesel engines is used in the production of automatic (or manual) water supply systems for various enterprises. It is also used in fire water supply and occasions with special requirements. The use of diesel engine pumps is mainly used for industrial emergency purposes, such as boiler feed water, high temperature water supply, industrial cycle. Diesel engine emergency pump standard composition and scope of supply Diesel engine using domestic or imported brand-name diesel engine, can also choose other high-quality diesel engine according to user requirements; generally 4-stroke, closed water-cooled, mechanical or electronic speed control, speed 1500r / Min ~ 3000r / min. The pump adopts the single-stage centrifugal water pump specially produced by our factory. According to the customer's requirements on the flow, lift or the nature of the use, the company selects the pump specification.

        The base of the diesel water pump unit is welded by heavy-duty steel structure, which integrates the diesel engine and the water pump. The heavy-duty steel structural parts are welded and specially treated to make the work more durable and reliable. Fully automatic control panel The automatic control panel provides two options depending on the user's site requirements: wall-mounted and vertical automatic control panels. The color of the automatic control panel is: safety system, navy ash; fire protection system. The panel is milky white and the cabinet is red. The automatic control panel includes: automatic start controller, intelligent switch source power charger, unit water heater monitoring component, charging voltmeter, charging ammeter, chronograph, emergency button, etc. Non-standard composition and scope of supply The diesel fuel tank unit's daily fuel tank and the diesel engine pump unit's intelligent DC control cabinet.

Related Pump Knowledge
More Pump Knowledge
02 May 2025
             With the rapid advancement of industrial development, multistage centrifugal pumps are increasingly wi...
Read more
25 Apr 2025
          There could be many reasons why a horizontal double-suction centrifugal pump fails to draw water. The following are...
Read more
17 Apr 2025
            In the modern industrial equipment system, multistage centrifugal pumps, as core fluid transfer devices, are...
Read more
09 Apr 2025
          In the mining industry, one of the pumps frequently used in mines is the slurry pump. This is a type of pump capabl...
Read more
Related Products
More
Split Case Pump
Split Case Pump
  • Capacity:60-33005m³/h
  • Head:0.95-30.2bar
  • Price:$2200-215000
Double Suction Pump
Double Suction Pump
  • Capacity:60-33005m³/h
  • Head:0.95-30.2bar
  • Price:$2200-215000
Single Stage Chemical Pump
Single Stage Chemical Pump
  • Capacity:5.5-2600m³/h
  • Head:1.6-25bar
  • Price:$4300-37000
End Suction Chemical Pump
End Suction Chemical Pump
  • Capacity:5.5~400m³/h
  • Head:0.42-12.5bar
  • Price:$560-9800
Need More Information?
Contact us for more details about our pump, solutions and services.
Contact ZB
Tel
0086 731 88192011
Email
Chat online
Leave a message
Name*
Tel
Email*
Area
Products
Split Case Pump
Metallurgy
Mining Industry
Urban Water Supply
Petrochemical
Light Industry
Electricity
Chemical Industry
Farmland Irrigation
Other
Provide your comments and questions.