Seawater pump is suitable for fire protection on offshore platforms, heat dissipation of equipment, seawater desalination, and can also be used as a heating source for ground source heat pump air conditioners in the coastal areas. All seawater lifting, coastal fountain landscape, marine aquaculture, etc. Low noise, high efficiency and energy saving.
Allowable media range
1: various sea water, alkaline corrosive water, no impurity water, chilled water / cooling water, rain water, coal mine, iron
Mine, gold
It belongs to the underground water, such as mines, and refers to water and mineral water.
2: Allowable working water temperature range +5 to +25 °C
3: solid impurity content (mass ratio) is not more than 0.01%
4: PH value (pH) 7.9-8.6
5: The crew must completely invade the water.
material
Impeller: tin bronze (various grades) such as: ZCuSn3Zn8Pb6Ni1
Pump casing: tin bronze (can cast various grades) such as: ZCuSn3Zn8Pb6Ni1
Pump shaft: stainless steel 316L. Filter: 316L. Connecting bolt: 316. Outlet flange: 316
Motor upper and lower guide bearing housing: 316. Middle part: 316. Motor shaft: 316
Motor seal: rubber seal O-ring; machine seal.
Motor expansion adjusts the capsule rubber material.
