Recommendations for use and maintenance of ih type chemical centrifugal pump
Chemical pumps are widely used in the chemical, metallurgical, pharmacy, and chemical foil industries, all with important applications. This article takes the ih type chemical centrifugal pump as an example, and puts forward some suggestions on the daily use and maintenance of chemical pumps. The operation conditions of the pumps should be checked frequently, and targeted technical transformations should be made for chemical pumps. Recommendations for use and maintenance of ih type chemical centrifugal pump are as follows:
Recommendations for use and maintenance of ih type chemical centrifugal pump
- The operating environment of ih type chemical centrifugal pumps in the enterprise has been greatly improved. Of course, in some places, there are still some chemical pumps that work in very harsh environments. These environments cannot be guaranteed due to cleanliness and hygiene. As a result, chemical pumps have increased a lot of difficulty in use and maintenance, and brought a lot of unnecessary troubles.
- Abnormal phenomena appear in the operation of ih chemical centrifugal pumps. According to many years of practical experience, in many chemical pump accidents, there will actually be some signs before the accident. If our operators or maintenance personnel can make these signs early It is discovered that this will take preventive measures in time to avoid complicated procedures and processes such as later inspections and maintenance. Of course, for the operator, he should make more work records in actual work, accumulate experience, and sum up the appearance and internal connection of abnormal phenomena in time.
3. In order to make the ih type chemical centrifugal pump run normally and continuously and extend its service life, daily inspection and maintenance should be done to make it a system. The pipeline should be thoroughly cleaned before installation of the insulation pump and self-priming magnetic pump. The incoming medium should have a filter before the impurity-free valve. When the insulation pump fails or is flushed, a bypass device should be installed to ensure the system continues to run.
- When the ih-type chemical centrifugal pump is in normal operation, even if it is a pump with a high degree of automation that does not need to be monitored, at least one or two inspections should be performed every shift. During maintenance, correct judgments should be made according to the actual situation, so that Targeted overhaul. According to the development trend of seals, many empty seals are now designed to effectively eliminate many of the above-mentioned leaks. As mentioned earlier, this is one of the important tasks for early detection of abnormal phenomena. In addition, regular inspections should be done as needed. . The daily inspection content is as shown in the table, and some records can be appropriately selected according to the instruction manual.
5. In the daily inspection, do not knock and beat during the disassembly operation, do not stack them when cleaning, and wash them with other non-matched parts to avoid bruising. During assembly, the assembly position must not be changed at will. If the filter element is found to be damaged and replaced in time, it must not be removed and used for direct-flow oil supply. Even parts that work for 500 hours under normal working conditions should be disassembled.
