Mining centrifugal pumps refer to pumps that are professionally used in coal mines. This series of pumps must pass the MA coal safety/KA coal safety certification. The pump models that meet this condition are the MD series mining multistage centrifugal pumps and MDP self-balancing resistant Multi-stage centrifugal water pumps for ore grinding, with a motor power of 37KW, have a lot of model parameters through the intelligent selection of Zoomlian Pumps, such as the following reference:
Model parameter reference of 37kw centrifugal water pump for mine:
The 37kw centrifugal water pump model MDP12-50x6 for mines has a flow rate of 12.5, a head of 250m, a speed of 2950r/min, a matching motor power of 37w, and an efficiency of 49%. The performance curve is as follows:
MD series 37kw centrifugal water pump for mining is horizontal structure, multi-stage segmented, its suction port is located on the water inlet section, in a horizontal direction, and the outlet port is vertically upward on the water section. Its head can be increased or decreased according to the needs of use. The number of pump stages. The flow parts of the pump are all cast iron, and the shaft is made of 45 steel. It is suitable for mines, factories and urban water supply and drainage. It is used to transport clean water without solid particles or liquids with physical and chemical properties similar to clean water. The temperature of the medium being transported is 0℃～80℃, and the allowable inlet pressure is 0.6MPa.
