Home / Services / Pump Encyclopedia / Pump Thesaurus / Overhung pump

Overhung pump

08 Jul 2018Email

The pump with only one end of the impeller supported by the bearing is called an overhung pump.

It is used to transport clean water and liquids with physical and chemical properties similar to water. Like IS single-stage end suction centrifugal pump.

single stage end suction pump

The boom of the overhung pump does not exceed 125 meters, the flow rate is 4.5-400m3/h, and the maximum temperature of the liquid must not exceed 80 °C. It is suitable for factories, mines, urban water supply and farmland irrigation.

For small flow and low lift conditions, it is a more economical option and easy to maintain.

Prev Overhaul Overload relay Next

Related Pump Knowledge

More Pump Knowledge

What are the reasons for excessive bearing endplay in a double-suction split-case centrifugal pump?

28 Aug 2025

Thanks to its unique structural design, the double-suction split-case centrifugal pump demonstrates certain advantages in t...

What are the effects of a water pump operating below its rated flow for a long time?

21 Aug 2025

With advantages such as good performance, high efficiency, long service life, and large flow rate, large-flow pumps are widely us...

A Discussion on the Causes and Solutions for Excessive Power Consumption During the Operation of Double-Suction Centrifugal Pumps

14 Aug 2025