Lean amine liquid circulating pumps need to be tested
When many small partners buy lean amine liquid circulating pumps and other pump products, they will be concerned about whether they pass the inspection before leaving the factory, the inspections required for the lean amine circulating pump to pass the factory, and what aspects of the pump are tested.
Lean amine liquid circulating pumps need to be tested
Today, I will take you to understand the pump inspection process of Luhuan Company before leaving the factory:
1. The inspector of our factory is responsible for inspecting and verifying each product (the inspection rate is 100%).
3. Key inspection content:
1. Check carefully whether there are: water leakage, sweating, blisters, seal leakage, etc.
2. Check whether the operation is stable and whether there is mechanical noise in the sound.
3. Check the temperature rise of the bearing housing (continuous monitoring, if abnormal conditions are found, the heating curve should be made). When the temperature rise exceeds 40 degrees, it is unqualified.
4. Check whether the flow rate, head, shaft power, etc. can reach the specified value.
5. Use a "vibration meter" to check whether the vibration value of the pump meets the standard.
6. File the original inspection data and inspection report for inspection at any time.
7. According to the inspection results, discover the problems in the production process in time, and have the right to request the rework of the unqualified products, and the unqualified products will never be allowed to leave the factory.
Zoomlian Pumps guarantees to complete the inspection of each product carefully and guarantees that the factory pass rate of Zoomlian Pumps products is 100%.
