Boiler feed pump technology is a new energy technology that has received worldwide attention in recent years. It is a device that transfers heat from a low-temperature heat source to a high-temperature heat source by consuming a part of high-grade energy. The heat transferred to the high temperature heat source includes the high grade energy consumed and the heat absorbed from the low temperature heat source.
A. Composition of boiler feed water pump hot water unit
Boiler feed water pump water heater (unit) is generally composed of compressor, condenser, liquid storage tank, expansion valve, evaporator and other components.
B. How the air heat pump works
When the air heat source pump is working, it consumes a part of energy itself, excavates the energy stored in the air, and uses the heat transfer working fluid circulation system to increase the temperature, and the power consumed by the entire boiler feed pump device is only the output work. a small part. The use of boiler feed pump technology can save a lot of high-grade energy. In operation, the evaporator extracts heat from the surrounding environment to evaporate the heat transfer medium. The temperature and pressure of the working fluid vapor rises after the compressor. When the high temperature vapor is condensed into a liquid through the condenser, the released heat is transferred to the storage tank. Water. The condensed heat transfer medium is returned to the evaporator through the expansion valve and then evaporated, thus circulating back and forth.
C. Advantages of boiler feed pumps in traditional fermentation
1. Energy saving: Boiler feed water pump has energy saving advantages over the current traditional steam heating.
2. Environmental protection: The boiler feed pump has no toxic and harmful combustion emissions, and no greenhouse gas emissions. The noise meets environmental requirements.
3. Safety: Microcomputer control, complete water and electricity separation, no leakage danger, no poisoning or explosion hazard.
4. Can use the original site, technology, equipment, small footprint, light weight, and can be moved.
5. There are many boiler failures and large repair costs. After using the boiler feed water pump, the boiler does not use the boiler, which can greatly reduce the boiler operation cost.
6. The boiler power supply pump existing power supply system can meet the requirements, no need to carry out line transformation. The boiler feed water pump does not need steam, circulating water, and the original water and steam pipelines do not need to be repaired.
7. Conform to the energy conservation and consumption reduction policies advocated by the state.
