EN CN
Home / Services / Pump Encyclopedia / Pump Technique / High-pressure water pump model with a head of 400 meters

High-pressure water pump model with a head of 400 meters

28 Mar 2021Email

The pump head is proportional to the pressure, and the pressure corresponds to the Yangcheng, and the pressure of 1MPa is equal to 100 meters of the Yangcheng. The pump with a head of 400 meters is a high-lift high-pressure pump. Through the intelligent selection of the online pump selection system of Zoomlion Pump, there are many models of high-pressure centrifugal pumps with a head of 400 meters, as shown in the figure below:

High-pressure water pump model with a head of 400 meters

The main pump type selection for high-pressure water pump with a head of 400 meters is D-type horizontal multi-stage centrifugal pump and self-balancing multi-stage pump, which have the same performance parameters and are used for conveying solid particles ≤ 2%, particle size ≤ 1.3 mm, and medium solid concentration. It is used for clear water less than 5%wt and temperature ≤105℃ or other liquids with physical and chemical properties similar to clear water. The allowable inlet pressure of the pump is ≤0.6MPa. It can also be used to transport hot water, oil, corrosive or abrasive media with a temperature of ≤210℃ by changing the material of the pump (or the material of the pump's flow-through parts), sealing form, and adding a cooling system.

 

D-type horizontal multi-stage centrifugal pump and DP-type self-balancing multi-stage pump have high efficiency and can meet the needs of high head and high flow conditions. They are all horizontal, single-suction, multi-stage, and segmented structures, and adopt national recommendations. The hydraulic model has significant advantages such as high efficiency, low operating noise, good anti-cavitation performance, reasonable structure and long service life. The significant difference between the two is whether there is a balance disc gimbal device. The D-type horizontal stage pump uses a balance disc or a balance drum to balance the axial force. The self-balancing multi-stage pump reforms and innovates the traditional structure. The axial force balance mechanism of the multi-stage centrifugal pump has been eliminated, and the balance device has been eliminated, and it has become a replacement product of the D and DG multi-stage centrifugal pumps with a balance disc or a balance drum structure. The pump efficiency is improved by 5- 14%.

Related Pump Knowledge
More Pump Knowledge
16 Mar 2026
      Combining equipment characteristics and practical operating experience, the clearance adjustment of the balance drum and balance ...
Read more
09 Mar 2026
     As a fluid delivery equipment widely used in industrial fields, the performance stability of multistage centrifugal pumps is criti...
Read more
28 Feb 2026
      The head of a centrifugal pump is closely related to the pressure in the pipeline, and directly affects the flow state and delive...
Read more
20 Feb 2026
     The MD type wear-resistant multistage centrifugal pump for coal mines is independently developed by Changsha Zoomlian Pump Industry. It possesses...
Read more
Related Products
More
Split Case Pump
Split Case Pump
  • Capacity:60-33005m³/h
  • Head:0.95-30.2bar
  • Price:$2200-215000
Double Suction Pump
Double Suction Pump
  • Capacity:60-33005m³/h
  • Head:0.95-30.2bar
  • Price:$2200-215000
Single Stage Chemical Pump
Single Stage Chemical Pump
  • Capacity:5.5-2600m³/h
  • Head:1.6-25bar
  • Price:$4300-37000
End Suction Chemical Pump
End Suction Chemical Pump
  • Capacity:5.5~400m³/h
  • Head:0.42-12.5bar
  • Price:$560-9800
Need More Information?
Contact us for more details about our pump, solutions and services.
Contact ZB
Tel
0086 731 88192011
Email
Chat online
Leave a message
Name*
Tel
Email*
Area
Products
Split Case Pump
Metallurgy
Mining Industry
Urban Water Supply
Petrochemical
Light Industry
Electricity
Chemical Industry
Farmland Irrigation
Other
Provide your comments and questions.