In the daily use of horizontal acid-resistant pumps, attention should be paid to the maintenance of the parts used in order to prolong its life. The equipment is not prone to failure. The daily maintenance of acid-resistant pumps should do the following:
1. The liquid and dust or other dirt on the pipes of the horizontal acid-resistant pump unit and the acid-resistant pump should be wiped frequently to keep the acid-resistant pump clean.
2. The lubricating grease in the bearings of horizontal acid-resistant pumps should also be replaced regularly. For example, all horizontal acid-resistant pumps are usually equipped with sliding bearings. All centrifugal pumps equipped with sliding bearings have been used for about 100 hours. After that, the lubricating oil should be replaced, and the lubricating oil of the rolling bearing should be changed after every 300-500 hours of operation.
3. If it is a packing-sealed single-stage single-suction centrifugal pump product, check and adjust the tightness of the packing at any time.
4. Frequently check and tighten loose bolts and nuts.
5. Frequently clean up the suspended solids in the pool, and let the horizontal acid-resistant pump enter the pool cleanly to prevent debris from blocking the water inlet pipe and being sucked into the pump, breaking the impeller or blocking the pump body.
The daily maintenance of the horizontal acid-resistant pump is very important. If the daily maintenance of the acid-resistant pump is not done well, a new acid-resistant pump is likely to have various failures soon after it is used.
