Working environment description:
1. All micro water pumps are connected to DC 12V or 24V power supply, and cannot be directly connected to 220V AC power, otherwise the motor will be directly burned.
2. It is not an explosion-proof product, so its working environment cannot have inflammable and explosive objects or gases, and the surrounding environment should be ventilated and ventilated, and not too humid.
3. When installing, the pump head cannot be vertically downward. Avoid dropping the micro pump on the ground and damage the pressure protection switch.
4. Can't work in water.
5. Working medium of micro water pump
Description of working medium:
1. Only the medium that is resistant to weak acid, weak alkali and weak corrosion can be extracted, preferably clean water.
2. The medium containing oil cannot be extracted.
3. The medium containing fixed particles cannot be extracted.
4. The medium temperature of the working medium is 0-40 degrees Celsius, and it can be 50-60 degrees Celsius in a short time. But it is best not to exceed 30 minutes.
Care instructions:
1. If it has not been used for a long time, it is necessary to periodically clean the dust and other impurities in the water inlet and outlet.
2. Regularly check the power cord of the pump and the contact of the power cord for leakage or poor contact.
3. No liquid can enter the motor. If there is water in the motor shell, wipe it off in time.
4. When the micro high-pressure pump is working, it must work intermittently, which is beneficial to prolong the service life of the pump.
5. The micro-pump works in a short period of time, and its heating temperature is not very high, but if it works for a long time or 24 hours, the temperature of the micro-pump is relatively high. In this case, the customer needs to stop the pump when it is working, which can not only reduce the temperature of the pump, but also prolong the service life of the pump.
