The cdlf stainless steel vertical multi-stage pump adopts a vertical and segmented structure in structure. The suction and discharge ports of the pump are designed to form a line at the bottom, and a good hydraulic model is adopted. The axial force of the pump is solved by a hydraulic balance method, and the residual axial force is borne by a ball bearing, so it runs smoothly, with low noise, small footprint, and convenient decoration. The outer cylinder is made of stainless steel and has a beautiful appearance. All the flow parts are made of 304 stainless steel. It can be used to transport slightly alkaline water, mineral water, distilled water, swimming pool water and other chloride-containing compounds. It is corrosive Medium, but the temperature of the medium needs to be appropriately lowered and not too high. Normal temperature is good.
This series of vertical stainless steel multi-stage centrifugal pumps has a wide range of applications. It can be used for municipal tap water pipe network water supply and pressurization; it can be used in industry as a circulating water pump; it can be used in boiler feed water and condensate systems as boiler feed Water pumps and condensate pumps; used for domestic water supply; can also be used in environmental protection industry water treatment as a permeation analysis system for water delivery; stainless steel multi-stage pumps can also be used for agricultural irrigation and dehydration; due to the high pressure of stainless steel multi-stage pumps Therefore, it can also be used for cleaning of industrial plants or other cleaning tasks. In short, the vertical stainless steel multi-stage pump is a multi-purpose pump product.
The impeller, guide vanes and other parts of the stainless steel vertical multi-stage pump are pressed by stainless steel plates and welded by laser. The surface finish is high, the hydraulic flow loss is small, and the interior is easy to clean, which is very beneficial for conveying pure media.
Because the impeller is made of stainless steel plates by pressing and welding, some cast impellers are difficult to achieve small flow, high-lift pumps can be easily realized.
1. The overall structure of the pump is arranged in the pipeline in a pipeline type, and the floor space is small. The pipeline can not be disassembled when the pump is repaired;
2. The pump shaft and the motor shaft are connected by a split rigid coupling, which can be easily connected and disconnected, and can accurately ensure the centering of the pump shaft and the motor shaft;
3. The shaft seal of the pump adopts a cartridge mechanical seal, which is convenient for loading and unloading; and there are a variety of mechanisms and materials for Xuanyuan to ensure safe use;
4. The impeller, guide vane and other parts of the pump are made of stainless steel pressing and welding. The pump body and pump cover are generally precision cast, which is easy to clean and has a beautiful appearance.
