EN CN
Home / Services / Pump Encyclopedia / Pump Technique / CDL150-50-1 multi-stage pump detailed parameters and performance curve

CDL150-50-1 multi-stage pump detailed parameters and performance curve

20 Oct 2021Email

   CDL150-50-1 multistage pump

   Model: CDL150-50-1

  Rated flow (m3/h): 150

  Rated head (m): 99

  Rated efficiency (%): 59

   Shaft power (kw): 68.6

   Impeller series: 5

  Speed (rpm): 2950

  Impeller material: 304/316L

   Guide vane material: 304/316L

  Rubber code: NBR/EPDM

  Pump head, inlet and outlet section: HT200

  Environmental temperature: maximum +40℃

   Connection method: standard flange PN25/DN25

   Connection code: F

   Medium temperature normal temperature type: -15℃~+70℃

   Medium temperature hot water type: -15℃~+120℃

  Motor power (kw): 75

   Motor phase number: three-phase

  Protection level: IP55

   Insulation class: F

  Mechanical seal: CDLA-32

   Impeller steering: clockwise

   Weight (kg): 690

 

CDL150-50-1 multi-stage pump performance curve

CDL150-50-1 multi-stage pump performance curve

CDL150-50-1 multi-stage pump installation drawing

CDL150-50-1 multi-stage pump installation drawing

CDL150-50-1 multi-stage pump structure diagram

CDL150-50-1 multi-stage pump structure diagram

 

Multistage pump is mainly composed of four parts: stator, rotor, bearing and shaft seal:

  1. The stator part of the multi-stage pump is mainly composed of the suction section, the middle section, the discharge section and the guide vane, etc., with tension bolts to clamp each section to form a working room. The D-type pump generally sucks in horizontally and discharges vertically upward; when it is used for water injection in oil fields, the inlet and outlet of the pump are vertically upward. The outlet and inlet of the DG multi-stage pump are vertically upward.

  2. The rotor part of the multi-stage pump is mainly composed of shaft, impeller, balance disc and shaft sleeve. The axial force is balanced by the balance plate.

  3. Multi-stage pump bearings are mainly composed of bearing bodies, bearings and bearing glands. The bearings are lubricated with grease or thin oil.

  4. The shaft seal of the multi-stage pump adopts a soft packing seal, which is mainly composed of the sealing box body, packing and water retaining ring on the water inlet section and the tail cover. D type pump water seal water comes from the pressure water in the pump. The sealing water of DG pump comes from external water supply.

Related Pump Knowledge
More Pump Knowledge
25 Mar 2024
Large displacement pump type           Large displacement pump, as the name suggests, is a pump with a very large flow, and ...
Read more
18 Mar 2024
         Coal mine drainage pump is one of the indispensable mechanical equipment in coal mine, its role is reflected in many...
Read more
07 Mar 2024
        The working principle of the multistage centrifugal pump is: relying on the high-speed rotating impeller, the liquid obtai...
Read more
29 Feb 2024
          Centrifugal pump is a common and important type of pump, which is widely used. However, in the process of using centrifugal pumps, irrigatio...
Read more
Related Products
More
Split Case Pump
Split Case Pump
  • Capacity:60-33005m³/h
  • Head:0.95-30.2bar
  • Price:$2200-215000
Double Suction Pump
Double Suction Pump
  • Capacity:60-33005m³/h
  • Head:0.95-30.2bar
  • Price:$2200-215000
Single Stage Chemical Pump
Single Stage Chemical Pump
  • Capacity:5.5-2600m³/h
  • Head:1.6-25bar
  • Price:$4300-37000
End Suction Chemical Pump
End Suction Chemical Pump
  • Capacity:5.5~400m³/h
  • Head:0.42-12.5bar
  • Price:$560-9800
Need More Information?
Contact us for more details about our pump, solutions and services.
Contact ZB
Tel
0086 731 88192011
Leave a message
Name*
Tel
Email*
Area
Products
Split Case Pump
Metallurgy
Mining Industry
Urban Water Supply
Petrochemical
Light Industry
Electricity
Chemical Industry
Farmland Irrigation
Other
Provide your comments and questions.