CDL200-30-2B multi-stage pump
Model: CDL200-30-2B
Rated flow (m3/h): 200
Rated head (m): 75
Rated efficiency (%): 59
Shaft power (kw): 69.3
Impeller series: 3
Speed (rpm): 2950
Impeller material: 304/316L
Guide vane material: 304/316L
Rubber code: NBR/EPDM
Pump head, inlet and outlet section: HT200
Environmental temperature: maximum +40℃
Connection method: standard flange PN25/DN25
Connection code: F
Medium temperature normal temperature type: -15℃~+70℃
Medium temperature hot water type: -15℃~+120℃
Motor power (kw): 75
Motor phase number: three-phase
Protection level: IP55
Insulation class: F
Mechanical seal: CDLA-36
Impeller steering: clockwise
Weight (kg): 748
CDL200-30-2B multi-stage pump performance curve
CDL200-30-2B multi-stage pump installation drawing
CDL200-30-2B multi-stage pump structure diagram
Multistage pump is mainly composed of four parts: stator, rotor, bearing and shaft seal:
1. The stator part of the multi-stage pump is mainly composed of the suction section, the middle section, the discharge section and the guide vane, etc., with tension bolts to clamp each section to form a working room. The D-type pump generally sucks in horizontally and discharges vertically upward; when it is used for water injection in oil fields, the inlet and outlet of the pump are vertically upward. The outlet and inlet of the DG multi-stage pump are vertically upward.
2. The rotor part of the multi-stage pump is mainly composed of shaft, impeller, balance disc and shaft sleeve. The axial force is balanced by the balance plate.
3. Multi-stage pump bearings are mainly composed of bearing bodies, bearings and bearing glands. The bearings are lubricated with grease or thin oil.
4. The shaft seal of the multi-stage pump adopts a soft packing seal, which is mainly composed of the sealing box body, packing and water retaining ring on the water inlet section and the tail cover. D type pump water seal water comes from the pressure water in the pump. The sealing water of DG pump comes from external water supply.
