| Capacity: | 8-120m³/h |
| Head: | 3.77-14.3bar |
| Price: | ＄630-5000 |
| Model: | N |
| Temperature: | 0-120℃ |
| Structure: | Single stage |
| Power: | 5.5~75kw |
| Speed: | 2950/2980r/min |
| NPSH: | 2-5.5m |
| Efficiency: | 41-68% |
| Voltage: | 380V |
| Liquid Property: | Condensate water |
INTRODUCTION
A condensate pump is a specific type of pump to handle the condensate (water) produced in an HVAC (heating or cooling), refrigeration, condensing boiler furnace or steam system.
1. N condenser water pump for power station can deliver the condensate water which temperature below 120 degrees centigrade or other liquids whose physical and chemical properties are similar to the pure water.
2. N condenser water pump for power station is applicable to the thermal power station unit.
3. 100N130 and 150N110 condensate pump can deliver steam condensate whose temperature is up to 120 degrees centigrade.The others are up to 80 degrees centigrade.
APPLICATION
Condensate pumps may be used to pump the condensate produced from latent water vapor in any of the following gas mixtures:
1) Conditioned (cooled or heated) building air
2) Refrigerated air in cooling and freezing systems
3) Steam in heat exchange and radiators
4) The exhaust stream of very-high-efficiency furnaces
Condensate recovery systems help you reduce three tangible costs of producing steam:
1) Fuel/energy costs
2) Boiler water make-up and sewage treatment
3) Boiler water chemical treatment
STRUCTURE
• High efficiency & Low consumption
• High temperature liquid transmission
• Easy installation & maintenance
• Single stage single suction cantilever
MODEL DESCRIPTION
3 N 6 x 2
3 --------------- Inlet diameter: 3 inch
N -------------- Condensate pump
6 -------------- Ceiling of designed head/10
2 -------------- Number of impeller
G N L 3 – AB
G --------------- High suction head
N --------------- Condensate pump
L ---------------- Vertical installation
3 ---------------- Inlet diameter 3 inch
AB -------------- 2 different kinds of impellers
CURVE
PARAMETER
| Model | Flow rate (m3/h) | Flow rate (L/s) | Head (m) | Speed (r/min) | Shaft Power (kw) | Motor Power (kw) | Efficiency (%) | NPSHr (m) | Impeller Dia. (mm) | Pump Weight (kg) |
| 2.5N3*2 | 8 | 2.22 | 52.5 | 2950 | 3.05 | 5.5 | 37.5 | 1.9 | 148 | 50 |
| 10 | 2.78 | 51.5 | 2950 | 3.42 | 41 | 2 | ||||
| 12 | 3.33 | 50.5 | 2950 | 3.74 | 44 | 2.2 | ||||
| 3N6 | 16.5 | 4.8 | 62 | 2950 | 6.65 | 11 | 44 | 1.5 | 215 | 80 |
| 22 | 6.1 | 61 | 2950 | 7.4 | 59 | 1.7 | ||||
| 30 | 8.34 | 58 | 2950 | 8.8 | 54 | 1.9 | ||||
| 3N6*2 | 18 | 5 | 131 | 2950 | 15.7 | 22 | 41 | 1.75 | 215(I)225(II) | 100 |
| 26 | 7.22 | 128 | 2950 | 17.8 | 51 | 2.05 | ||||
| 34 | 9.45 | 120 | 2950 | 19.6 | 56.8 | 2.4 | ||||
| 4N6 | 30 | 8.33 | 63.5 | 2950 | 11 | 22 | 47 | 1.4 | 225 | 94 |
| 40 | 11.1 | 62 | 2950 | 12.7 | 53 | 1.6 | ||||
| 50 | 13.9 | 59.5 | 2950 | 14.1 | 57.5 | 1.75 | ||||
| 4N6a | 30 | 8.33 | 40 | 2950 | 6.3 | 11 | 49 | 1.6 | 175 | 92 |
| 40 | 11.1 | 38 | 2950 | 7.3 | 45.5 | 1.8 | ||||
| 50 | 13.9 | 37.7 | 2950 | 8.25 | 58.5 | 2 | ||||
| 4N6*2 | 25 | 6.95 | 130 | 2950 | 21.1 | 37 | 42 | 2 | 220(I)215(II) | 170 |
| 40 | 11.1 | 125 | 2950 | 25 | 54 | 2.2 | ||||
| 50 | 13.9 | 120 | 2950 | 27.3 | 60 | 2.4 | ||||
| 6N6 | 60 | 16.7 | 70 | 2950 | 22.9 | 37 | 50 | 1.4 | 232 | 120 |
| 90 | 25 | 66 | 2950 | 25.3 | 64 | 1.45 | ||||
| 120 | 33.3 | 60 | 2950 | 27.7 | 71 | 1.5 | ||||
| 100N130 | 42 | 11.7 | 143 | 2950 | 36 | 55 | 44 | 1.3 | 325 | 166 |
| 52.5 | 14.6 | 141 | 2950 | 40 | 49 | 1.5 | ||||
| 70 | 19.45 | 135 | 2950 | 46.8 | 55 | 2 | ||||
| 150N110 | 80 | 22.2 | 122 | 2950 | 48.3 | 75 | 55 | 1.35 | 300 | 188 |
| 100 | 27.8 | 116 | 2950 | 52.6 | 60 | 1.4 | ||||
| 110 | 30.5 | 112 | 2950 | 55 | 61 | 1.5 |
What is your product range?
Are you a manufacturer or trading company?
What information shall I provide you when I need your offer?
Can the pumps be shipped by air if I need them urgently?
Do you sell other brands water pumps? And do you accept OEM?
The specification requirements of our pumps are different with what you give out,can you customize them as my data?
